*NEW* Heavy Hitter 520 Primary Chain Drive Conversion

Important Notice:

When installing, make sure your chain tension is not tight! Any chain drive that you install should have loose chain tension! For OEM Motor ONLY! Most aftermarket motors have a +4mm offset change.

Big Performance for big power builds and long-term reliability. The heavy hitter Ultra Bee primary chain conversion is designed with perfection in mind.

Most primary chain conversions are flat-cut 420 sprockets, which will work but require additional maintenance and a shorter chain life. We have designed our chain conversion around a 520 chain because let's face it even on LightBee's broken chains were happening and with more weight and more power an upgrade is needed.

In addition to the chain size being upgraded, we have also designed an exclusive dished rear sprocket. The primary chain conversions with flat sprockets left very little room for the frame adjuster and rear lower motor mount frame tab. This will ultimately end up with damage and scarring to your frame if your tension goes slightly out of spec, so why not use the room provided and space it internally.

Features

Exclusive dished sprocket design for proper clearance

520 O-ring Chain included for long-term reliability

7075 aluminum design for increased longevity and reduced corrosion

No shims or spacers are required, a simple install (OEM Motor Only)

Master link chain for easy chain swaps when it is time for maintenance

Fitment

Sur Ron Ultra Bee (OEM Motor Only)

Important Notice:

When installing, make sure your chain tension is not tight! Any chain drive that you install should have loose chain tension!

This is the known and tested compatibility for this product. Factory variations, dealer options, and aftermarket modifications could affect compatibility in specific cases. Please verify compatibility to the best of your ability before purchasing.