Motorcycle Rim Strips [Multiple Sizes]

Rippin Moto Motorcycle Rim Strips — Durable Rubber Tube & Rim Protection (Multiple Sizes)

Protect your inner tube from spoke nipples and sharp rim edges with

Rippin Moto Rubber Rim Strips

. Built for street, dirt, pit bikes, and e-moto, these non-adhesive rim bands add a tough barrier between the rim and tube to reduce pinch flats and premature wear. Choose the

correct size variant

above for a precise fit.

Multiple sizes:

Select the exact rim diameter/width for your wheel.

Premium rubber construction:

Flexible, durable, and heat-resistant.

Pre-punched valve hole:

Quick, centered install with clean airflow.

Fewer flats, longer tube life:

Shields tubes from spoke ends and burrs.

Fast install:

No tools required—stretch over rim and seat evenly.

Sold individually (one strip per wheel).

Recommended Uses

Works for motocross, enduro, dual sport, supermoto, minis/pit bikes, and popular e-moto platforms. Fitment is by size, not model—match your

rim diameter and strip width

.

Size Guide

10″ × 3/4″

12″ × 3/4″

14″ × 1.0″

16″ × 1.0″

18″ × 1.25″

19" x 1.0"

21″ × 7/8″

Tip:

Choose the variant that matches your rim diameter. Wider, larger-bore rims typically use a 1″ band; minis/pit bikes often use 3/4″.

Install Steps

Remove tire and tube. Inspect rim for sharp edges; deburr if needed.

Stretch the rim strip over the rim. Align the valve hole with the valve opening.

Center the band so it fully covers spoke nipples all the way around.

Reinstall tube and tire to spec. Inflate and check for even seating.

What’s Included

1 × Rippin Moto rubber rim strip (size as selected)

FAQ

Is this “rim tape” or a “rim strip”?

These are

rubber rim strips

(also called rim bands)—non-adhesive, reusable protectors that sit inside the rim. Adhesive cloth/plastic “rim tape” is a different product. If you want the most forgiving protection for spoke nipples, use rubber rim strips.

How do I choose the right size?

Match your

rim diameter (inches)

and pick the

width

that fully covers the spoke holes (commonly 3/4″ for minis and 1″ for full-size rims). When in doubt, check your rim/tire size markings or contact us.

Will this work with tubeless setups?

No. These are designed for

tubed

wheels. For tubeless, use the manufacturer’s specified sealing system.

Do I need one or two?

Each wheel uses one strip. Order

two

if you’re servicing both front and rear wheels.

Why Rippin Moto

Tested by riders; built for real-world abuse.

Fast U.S. shipping and responsive support.

Parts for the next-gen rider—performance without the fluff.

Common names:

rim strip, rim band, inner tube protector, motorcycle rim tape (non-adhesive).